52
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Recording Movies with Subjects at the Same
Size Shown before Shooting
Still Images
Movies
Normally, once movie recording begins, the image display area changes
and subjects are enlarged to allow for image straightening and correction
of signicant camera shake.
To record movies with subjects at the same size shown before shooting,
you can reduce image stabilization and cancel Auto Level.
z Set [
Auto level] to [Disable] as
described in “Deactivating Auto Level”
(
=
51).
z Follow step 1 in “Deactivating Image
Stabilization” (
=
52) to access the [IS
Settings] screen.
z Choose [Dynamic IS], and then choose
[Low] (
=
29).
● You can also set [IS Mode] to [Off], so that subjects are recorded
at the same size shown before shooting.
● [Dynamic IS] is not available when [IS Mode] is set to [Off]
(
=
52).
● Only [Standard] is available when the movie quality is [
]
(NTSC) or [
] (PAL).
Changing the IS Mode Settings
Deactivating Image Stabilization
Still Images
Movies
When the camera is held still (as when shooting from a tripod), you should
set image stabilization to [Off] to deactivate it.
1
Access the setting screen.
z Press the [ ] button, choose [IS
Settings] on the [ 4] tab, and then press
the [ ] button (
=
29).
2
Congure the setting.
z Touch [IS Mode], and then choose an
option (
=
29).
Continuous
Optimal image stabilization for the shooting conditions is
automatically applied (Intelligent IS) (
=
38).
Off Deactivates image stabilization.
To Next Page
Loading...
Need help?
General
