Canon Powershot S2 IS

101
Shooting-Advanced Functions
6
You can adjust AEB settings in 1/3 stops within ±2 EV of the standard
exposure setting. AEB settings can be combined with exposure
compensation settings (p. 90) to extend the adjustment range. The
images are recorded in the following order: Standard exposure,
underexposure and overexposure.
1 From the FUNC. menu, select *
(BKT-OFF).
* The current setting is displayed.
2 Use the W or X button to select
(AEB), press the SET button and
adjust the compensation range with
the W or X button.
z Pressing the X button increases the
compensation, and pressing the
W button
decreases it.
z You can shoot the image right after selecting settings by pressing the
shutter button. The menu displays again after the shot, allowing you to
change the settings easily.
z Select (BKT-Off) to cancel the AEB mode.
The three shots are taken at the same interval as high-speed continuous
shooting.
Continuous Shooting (p. 62)
z The AEB mode cannot be used for flash photography. If the flash
fires, only one standard exposure image gets recorded.
z Three images are shot continuously regardless of the continuous
shooting setting (p. 62).