36
The following icons appear on the LCD monitor (or viewfinder) if it is set
to Information View display.
2 Press the MENU button.
Reviewing an Image Right After Shooting
After a photo is taken, the image displays for two seconds (to change this
setting, see page 37). There are two ways to display the image longer:
- Keeping the shutter button pressed after a shot.
- Pressing the SET button while the image is displayed
[Continuous]
[Shoot Only]
[Panning]
With no lens converter –
With separately sold teleconverter
mounted
p. 158
With separately sold wide converter
mounted
p. 158
z Camera shake may not be fully corrected when shooting with slow
shutter speeds, such as with evening shots. In this case, affix the
camera to a tripod.
z If camera shake is too strong, it may not be fully corrected.
z [Panning] is recommended for use when shooting while moving the
camera horizontally.
z Hold the camera horizontally while panning (stabilization does not work
when the camera is held vertically).
Photo Tips and Information (p. 174)
Mode Dial
To Next Page
Loading...
