105
Shooting-Advanced Functions
6
3 While pressing the shutter button halfway, press the
button.
z The flash pre-fires to acquire the exposure value required for the subject,
and appears on the LCD monitor (or viewfinder).
z Each time you press the button, the flash exposure locks at the
required intensity for that composition.
4 Recompose the image and shoot.
Switching between Built-in Flash
Adjustment Settings
The built-in flash fires with automatic flash adjustments (except in the
mode), but it is possible to set it so that it fires without any
adjustments.
1 Select [Flash Adjust] from the
[(Rec.)] menu.
See Selecting Menus and Settings (p. 73).
2 Use the W or X button to select [Auto] or [Manual] and
press the MENU button.
After performing FE lock, pressing anything except the shutter
button or the
S, T, W, X buttons cancels the FE lock.
FE Lock is not available while is displayed on the LCD monitor (or
viewfinder).
Mode Dial
To Next Page
Loading...
