Canon Powershot S2 IS

102
Focus Bracketing (Focus-BKT Mode)
The camera automatically takes three shots: one at the manual focus
position, and one each with focus positions preset nearer and farther.
The nearer and farther focus positions can be set in three steps:
large, medium and small. Images are shot with the focus position
changing in the following order; current position, farther and nearer.
1 Select * (BKT-Off) from the FUNC.
menu and use the W or X to select
(Focus-BKT), then press the SET
button.
* The current setting is displayed.
2 Set the amount of focus position
offset with the W or X button.
z Press the X button to broaden or the W button
to narrow the focusing distance from the center.
z You can shoot the image right after selecting settings by pressing the
shutter button. The menu displays again after the shot, allowing you to
change the settings easily.
3 Press the FUNC. button and shoot the image with the
manual focus (p. 111).
Mode Dial
The three shots are taken at the same interval as high-speed continuous
shooting.
Continuous Shooting (p. 62)
z The Focus-BKT mode is not available when shooting with the
flash on. Only one image at the manual focus position will be
taken.
z Three images are shot continuously regardless of the continuous
shooting setting (p. 62).