Canon Powershot S2 IS

146
3 Use the S or T button to select
[Print Type], [Date] or [File No.] and
select settings with the
W or X
button.
Print Type
z Select [Standard], [Index] or [Both].
Date
z Select [On] or [Off].
File No.
z Select [On] or [Off].
4 Press the MENU button.
The Setup menu closes and the Print Order menu reappears.
Image Transmission Settings (DPOF
Transfer Order)
You can use the camera to specify settings for images before
downloading to a computer. Refer to the Software Starter Guide for
instructions on how to transfer images to your computer.
The settings used on the camera comply with the Digital Print Order
Format (DPOF) standards.
z When [Print Type] is set to [Index], the [Date] and [File No.] cannot
be set to [On] at the same time.
z If you selected [Standard] or [Both] as the [Print Type], you can
also set the [Date] and [File No.] settings to [On] at the same time.
However, the data that is supported may vary among printers.
The date prints as the date and time in the format specified in the Set
[Date/Time] menu (p. 29).
may appear on memory card images that have had transfer
marks set by another DPOF-compliant camera.