Canon Powershot S2 IS

44
z You can move around the image using ST or WX on the omni selector.
z You can also cancel it immediately by pressing the MENU button.
z Movie frames and index playback images cannot be magnified.
z You can magnify an image while it is displayed on the LCD monitor (or
viewfinder) immediately after the image is shot (p. 36).
2 Press the SET button.
z The image advance mode is activated, and using the W or X button, the
preceding or next image can be displayed at the same level of
magnification.
z You can change the magnification level with the zoom lever.
z Pressing the SET button again cancels the image advance mode, and
the image can be moved around.
Viewing Images in Sets of Nine (Index Playback)
1 Press the zoom lever toward .
Nine images appear at once (index playback).
2 Change the image selection using the W, X, S or T
button on the omni selector.
Press the DISP. button to show the data for the selected image (p. 27).
Selected
Image
Movie
Pressing the
S arrow in
this row
displays the
previous set
of nine
images.
Pressing the
S arrow in
this row
displays the
previous set
of nine
images.
Pressing the
T arrow in
this row
displays the
next set of
nine images.