Canon Powershot S2 IS

118
Automated Playback (Slide Shows)
Slide show image settings are based on DPOF standards (p. 141).
Starting a Slide Show
A selection of images or all the images on an memory card can be
displayed one- by-one in an automated slide show.
1 In the [ (Play)] menu, select
[Slide Show] and press the SET
button.
z See Selecting Menus and Settings (p. 73).
z The Slide Show menu will display.
2 Use the S or T button to select
[Program] and select between [All
images] or one of [Show 1]-[Show 3]
with the
W or X button.
z See from Step 3 of "Select images for the
Slide Show" (p. 119) to select images for
slide shows 1 to 3.
z Selecting [Reset] cancels the slideshow settings.
3 Use the S or T button to select [Start] and press the SET
button.
The slide show starts. The Slide Show menu will reappear after the
playback ends.
Pausing/Resuming a Slide Show
z Press the SET button to pause the show ( appears). Press it again to
resume.
Slide Show Forward/Reverse
z User the W or X button to move to the previous or next image.
Stopping a Slide Show
z Press the MENU button during a slide show to stop it and display the
slide show menu.
All Images Plays all images on the memory card in order.
Slide Show 1-3 Plays the images selected for each show in order (p. 119).
Playback-Advanced Functions