18
Battery Status Indications
The following icons or messages indicate the battery status on the LCD
monitor (or viewfinder).
Installing the Memory Card
Write-Protect Tab
The memory card has a write-protect tab. Sliding the tab downward
prevents recording of data and protects existing data (e.g. images). When
recording to, erasing from or formatting the memory card, slide the tab
upward.
Turn the camera power off and insert the memory card with the following
procedures.
1 Slide the memory card slot cover
in the direction of the arrow, and
open it.
Batteries are beginning to run low. Replace or recharge the batteries if
you wish to continue using the camera.
Change the batteries.
The batteries are discharged and the camera can no longer operate.
Replace the batteries immediately.
Ensure that the memory card is correctly oriented before inserting it in
the camera. It may damage the camera if inserted backward by mistake.
Write-Protect Tab
Writing/Erasing Possible Writing/Erasing Impossible
a
b
To Next Page
Loading...
