13
Preparing the Camera
1
Attaching the Neck Strap
Attach the strap as illustrated.
Check that the strap does not
come loose from the strap
mount when pulled. Perform
the same steps on the other
side of the camera.
Avoid waving the camera about or catching it on other items
when suspending it from the strap.
Attaching the Lens Cap
Fit the lens cap over the lens
casing so that it covers the
entire lens.
Always replace the lens cap
after use.
Attach the lens cap cord to the strap.
Remove the lens cap before turning on the camera's power.
To Next Page
Loading...
