Canon Powershot S2 IS

68
Changing the Sound Mode
Microphone level (sound recording level), wind filter and sampling rate
can be changed.
1 Select [Audio] in the [ (Set up)]
menu and press the SET button.
Selecting Menus and Settings (p. 73)
2 Use the S or T button to select
[Mic Level] and set the sound
level with the
W or X button.
3 Use the S or T button to select
[Wind Filter] and select [On] or [Off]
with the
W or X button.
z This suppresses noise when the wind is strong.
z The default setting is Off.
z When set to On, displays in the LCD
monitor (or viewfinder).
4 Use the S or T button to select
[Sampling Rate] and select the
frequency with the
W or X button.
z Sampling rate is selectable from 44.100,
22.050 and 11.025 kHz.
z Higher sample rates provide better sound
quality but require more memory for recording.
Mode Dial