Canon Powershot S2 IS

83
Shooting-Advanced Functions
6
Registering a Function
1 Select [Set Shortcut button] from
the [ (Rec.)] menu and press the
SET button.
z See Selecting Menus and Settings (p. 73).
2 Use the W or X button to select the
function you wish to register and
press the SET button.
z If an "x" mark appears on the lower right of the
icon, you can still register this function but the
current shooting mode will be retained and
pressing the shortcut button will not activate the
function (the icon of the registered function will
not appear).
Using the Shortcut Button
1 Press the button.
The registered function is recalled and its icon appears on the LCD monitor
or viewfinder (except if the display is off).
z Pressing the button cycles between
setting values of the registered function.
z Functions that are not available in the current
shooting mode will not appear even if they are
registered. Select a compatible shooting mode
and press the button again.
Mode dial set to