101
Playback/Erasing
5
2 Select (Custom 1), (Custom 2)
or (Custom 3) with the or
button and press the FUNC./SET
button.
z A checkmark (3) will appear beside a show
already containing images.
z Only (Custom 1) is displayed in the
default settings.
z Settings can be made by turning the multi control dial.
z
When selecting all images at once, use the or button to select [Mark
All], then press the
FUNC./SET
button. Furthermore, select [Mark all] with
the the or button, press the
FUNC./SET
button, select [OK] with the
or button and then press the
FUNC./SET
button. Also, return to ,
, or with the the or button, then press the
FUNC./SET
button
to deselect images specified by the method in Step 3. Specified images
can be selected or deselected even after a [Reset] is performed.
3 Select images for the Slide Show.
Single Image Playback
z Select an image with the or button
and select (or deselect) by pressing the
FUNC./SET button.
z The selection number and a check mark (3)
appear in the upper part of selected images.
z Press to display the Jump Bar (p. 90).
After jumping and pressing the MENU
button, press the FUNC./SET button to select or deselect images.
Index Playback
z Press the zoom lever toward to switch to
index playback (9 images).
z Use the , , or button to select
an image and select (deselect) by pressing
the FUNC./SET button.
z The selection number and a check mark (3)
appear at the bottom of selected images.
4 Press the MENU button.
The image selection screen will close.
EC176CUG_E.book Page 101 Tuesday, June 28, 2005 12:40 PM
To Next Page
Loading...
