102
Adjusting the Play Time and Repeat Settings
1 Display the slide show menu (p. 99).
2 Use the or button to select
[Set up] and press the FUNC./SET
button.
3 Use the or button to select
[Play Time] or [Repeat], and set
with the or button.
Settings can be made by turning the multi
control dial.
Play Time
z Select a play time.
Repeat
z Select [On] or [Off].
4 Press the MENU button.
The Setup menu closes.
Play Time
Sets the amount of time for each image to be displayed in the slide show.
Choose between 3-10 seconds, 15 seconds and 30 seconds.
Repeat
Sets whether the slide show stops when all the slides have been displayed or
continues until stopped.
Depending on the images, the display interval may vary slightly from the
setting when played.
EC176CUG_E.book Page 102 Tuesday, June 28, 2005 12:40 PM
To Next Page
Loading...
