112
3
Select an image or record a sound.
zStart-up Image
Use the or button to select
the image you wish to register and
press the FUNC./SET button.
zStart-up, Operation, Self-timer
and Shutter Sounds
Select (Record) and press the
FUNC./SET button. After recording,
select (Register) and press the
FUNC./SET button.
- Recording will automatically stop when the recording time
elapses.
- To play it, select (Play).
- To exit instead of registering, press (Exit).
4
Select [OK] and press .
zTo cancel registering, select
[Cancel].
z The following cannot be registered as My Camera
settings.
-Movies
- Sounds recorded with the sound memo function (p. 90)
- Sounds recorded with the Sound Recorder (p. 91)
z The prior setting is erased when a new My Camera setting
is added.
See the supplied Software Starter Guide for more information
on creating and adding to the My Camera data.
To Next Page
Loading...
