Canon PowerShot SD750 User Guide Advanced User Manual

Shooting
33
Using the Digital Zoom
Using the Digital Tele-Converter
2
Press the zoom lever toward and shoot.
zThe combined optical and digital
zoom factor will appear on the LCD
monitor.
zBased on the number of recording
pixels set, the Safety Zoom feature
calculates the maximum zoom fac-
tor beyond which image quality will
begin to deteriorate. The digital zoom pauses at this zoom
factor for a moment, and appears on the LCD monitor
(except in mode).
If you press the zoom lever toward again, you can zoom
in even closer. In this case, the displayed zoom factor
changes from white to blue.
z
Pressing the zoom lever toward reduces the zoom factor.
2
Adjust the angle of view with the zoom lever
and shoot.
z and the zoom factor will display
on the LCD monitor.
zThe image may appear coarse
depending upon the selected
recording pixels (the icon and
the zoom factor appear in blue).
About the Digital Tele-Converter
A digital tele-converter is a function that reproduces the effect of a
tele-converter lens (supplemental lens that extends the zoom
factor of a lens) when the digital zoom is used.

Canon PowerShot SD750 User Guide Advanced Specifications

General

Model	Canon PowerShot SD750
Category	Digital Camera
Effective Pixels	7.1 megapixels
Image Sensor	1/2.5-inch CCD
Optical Zoom	3x
Digital Zoom	4x
LCD Screen Resolution	230, 000 dots
Shutter Speed	15 - 1/1500 sec
White Balance	Auto, Daylight, Cloudy, Tungsten, Fluorescent, Fluorescent H, Custom
Storage Media	SD, SDHC, MMC, MMCplus, HC MMCplus
File Format	JPEG (Exif 2.2)
LCD Screen Size	3.0 inch
ISO Sensitivity	Auto, 80, 100, 200, 400, 800
Flash Modes	Auto, On, Off
Battery	NB-4L Lithium-Ion (3.7V, 760mAh)