Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print User Manual

92
3
Shoot the image.
The correct exposure has been set if the shutter speed and
aperture value show in white.
• If the shutter speed shows in red on the LCD monitor,
the image is under exposed (insufficient light) or
overexposed (too much light). Adjust the aperture value
using the left and right buttons until the shutter speed
display turns white.
• Some aperture values may not be available with certain
zoom positions (p. 90).

Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print Specifications

General

Brand	Canon
Model	Printing Using a Direct Camera/Printer Connection Guide Direct Print
Category	Digital Camera
Language	English