Canon TS7440 - Page 47

A confirmation screen is displayed whether you want to display password information.
When you select ON or OFF, the setting values for using the printer with Wireless Direct are
displayed.
• Change network name (SSID)
Change the identifier (SSID) for Wireless Direct.
The identifier (SSID) is the printer's name (device name) displayed on a Wi-Fi Direct compatible
device.
Follow the procedure below to change the identifier (SSID).
◦
To set manually
1.
Select Change manually.
The input screen is displayed.
2.
Enter the identifier or printer name.
3.
Confirm the inputted content and press the Start button.
◦
To set automatically
1.
Select Auto update.
2. Select Yes.
3. To show the password, select ON and to hide the password, select OFF.
You can check the updated setting.
• Change password
Change the password for Wireless Direct.
◦ To set manually.
1. Select Change manually.
The input screen is displayed.
2. Enter the new password (10 characters).
3.
Confirm the inputted content and press the Start button.
◦ To set automatically
1. Select Auto update.
2.
Select Yes.
3.
To show the password, select ON and to hide the password, select OFF.
You can check the updated setting.
•
Connection request confirmation
Change the confirmation screen setting when a Wi-Fi Direct compatible device is connecting to
the printer.
If you want the printer to display the screen to inform you a Wi-Fi Direct compatible device is
connecting to the printer, select ON.
47