Settings back side What to enter
Diamond The image is adjusted in mm (inches).
Adjustment > 0:
• The diagonal from the top-right corner of
the image to the bottom-left corner of the
image increases.
• The distance between the dot at the top-
right corner and the dot at the bottom-left
corner increases.
• The diagonal from the top-left corner of the
image to the bottom-right corner of the im-
age decreases.
• The distance between the dot at the top-left
corner and the dot at the bottom-right cor-
ner decreases.
Adjustment < 0:
• The diagonal from the top-right corner of
the image to the bottom-left corner of the
image decreases.
• The distance between the dot at the top-
right corner and the dot at the bottom-left
corner decreases.
• The diagonal from the top-left corner of the
image to the bottom-right corner of the im-
age increases.
• The distance between the circle at the top-
left corner and the circle at the bottom-right
corner increases.
Ranges
Setting Range (mm) Range (inches)
Diamond -2.5 to +2.5 -0.098 to +0.098
Skewed Image
When to do
The image is skewed (rotated) on the front side and/or on the back side.
Skewed Image
340
Chapter 13 - Media Handling
Canon varioPRINT DP line
To Next Page
Loading...
