3-18
Authorized/Restricted Host Specification
Note
● If you do not make a Host List, access is permitted to any hosts.
● If the Host List provided prohibits access for all hosts, the Host Restriction function
is disabled and access is permitted to all hosts.
● To prohibit access over HTTP connection via a proxy server, the address of the
proxy server must be set.
● If you set the host restriction incorrectly, access to the settings page itself may be
denied. In this event, the problem can only be recovered by restoring the factory
default settings.
Setting User Access Privileges (Access Control)
1 “Host List”
In this Host List, you can in detail whether of how access from the hosts is permitted or denied.
See the next page for the description format.
2 “Apply this list to HTTP server”
When this is selected, the Host List is applied to the host that can access the HTTP server. In
this case, control extends also to the Viewer for Java, etc. Use this when you want to restrict
access not only from the viewer but also to the Web page.
3 “Apply this list to Video Transmission”
Select to apply the
Host List
to a host who may have access to the WebView Livescope server.
Use “Apply this list to Video Transmission” if you want to restrict access from the Viewer for Java
and Viewer for PC etc.
4 “Apply this list to Still Image Capture”
When this is selected, the Host List is applied to the host that can capture still images.
1
2
3
4
To Next Page
Loading...
Need help?
General
