EasyManuals Logo

Canon VB-R11 User Manual

Canon VB-R11
287 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #126 background imageLoading...
Page #126 background image
126
Settings for using IPsec.
Note
If IPsec is used, video transmission performance drops.
IPsec
[IPsec]
Select key settings for using IPsec.
Auto Key Exchange Settings
[IPsec SA Encryption Algorithm]
Select the IPsec SA encryption algorithm.
The specified algorithm will be checked for an applicable encryption algorithm starting from the left.
[IPsec SA Authentication Algorithm]
Select the IPsec SA authentication algorithm.
The specified algorithm will be checked for an applicable authentication algorithm starting from the left.
[IPsec SA Validity Period (min)]
Enter the duration of validity for IPsec SA.
[ISAKMP SA Encryption Algorithm]
Select the SA encryption algorithm for use with auto key exchange protocol IKE.
Set IPsec
[Security] > [IPsec]
Important
To run this camera with IPsec, the communicating devices and network must be set beforehand. Contact your system administrator for
these settings.
When connecting with IPsec, set the camera IP address manually.
For IPv4 addresses, use addresses with [IPv4 Address Setting Method] set to [Manual] in [Basic Settings] > [Network] > [IPv4].
For IPv6 addresses, use addresses set with [IPv6 Address (Manual)] in [Basic Settings] > [Network] > [IPv6].
If the IPsec setting is changed and the camera may become inaccessible from the active web browser, a confirmation dialog box will
appear. Click [OK] to apply the new settings.
If you reboot the camera and cannot connect to the camera from the web browser, any available URI for connecting to the camera will
be displayed in a message.
If you cannot connect to the camera through the displayed URI, contact your system administrator.

Table of Contents

Other manuals for Canon VB-R11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon VB-R11 and is the answer not in the manual?

Canon VB-R11 Specifications

General IconGeneral
Camera TypeNetwork Camera
Effective PixelsApprox. 2.07 megapixels
Minimum Illumination0.5 lx (Color, 1/30 sec, F2.0, AGC ON), 0.1 lx (B/W, 1/30 sec, F2.0, AGC ON)
Shutter Speed1/30 to 1/10, 000 sec
Resolution1920 x 1080 (Full HD)
Frame Rate30 fps (1920 x 1080)
Sensor TypeCMOS
Image Sensor1/3" CMOS
ApertureF1.2 to F2.8
Angle of ViewHorizontal: 90.1°, Vertical: 50.6°, Diagonal: 108.3°
Video CompressionH.264, M-JPEG
Audio CompressionG.711, G.726
Network Interface10Base-T/100Base-TX
ProtocolsTCP/IP, UDP, HTTP, FTP, SMTP, DHCP, DNS, DDNS, RTP/RTCP, RTSP, SNMP
Power SourcePoE (IEEE 802.3af)
Operating Temperature-10°C to 50°C
Day/NightAuto
Power SupplyPoE (IEEE 802.3af)
Operating Humidity20% to 80% (non-condensing)
LensVarifocal

Related product manuals