Canon XH A1 User Manual

101
E
Playback
Returning to a Pre-marked Position
If you wish to return to a particular scene later, mark the point with the zero set memory, and the tape will
stop at that point when you rewind/fast forward the tape.
This function is operated with the wireless controller.
1. During playback, press the ZERO SET MEMORY button at the point you wish to return
to later.
• The tape counter is reset to 0:00:00 and the mark appears.
• To cancel, press the ZERO SET MEMORY button again.
2. After you finish playing back the tape, stop and rewind it.
• If the tape counter shows a negative value, fast forward the tape instead.
• The tape stops automatically at “0:00:00” and the mark disappears.
• The tape counter changes to time code.
 The zero set memory may not function correctly if the time code has not been recorded
consecutively.
 The zero set memory function may not work correctly if you mix recordings in HDV and DV
standards on the same tape.
REW button
ZERO SET MEMORY
button
STOP button

Canon XH A1 Specifications

General

Built-in display	Yes
Display diagonal	2.8 \
Display resolution	207000 pixels
Filter size	72 mm
Optical zoom	20 x
Image stabilizer	No
Focal length range	4.5 - 90 mm
Interchangeable lens	-
Total megapixels	1.67 MP
Camcorder tape type	HDV
Internal storage capacity	0 GB
Focus	Auto: Instant AF; Manual: Independent
I/O ports	-Headphone -Microphone -DV(out/in) -Analogue-in -AV -LANC
Viewfinder resolution	269000 pixels
Viewfinder screen size	0.57 \
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) out	0
Product color	Black
Battery type	BP-970G
Battery life (max)	7 h
Camera shutter speed	1/16000 s
Camcorder type	Shoulder camcorder
Minimum illumination	0.4 lx
Maximum video resolution	1440 x 1080 pixels

Weight and Dimensions

Depth	350 mm
Width	163 mm
Height	189 mm
Weight	2330 g