Canon XM2 User Manual

Inserting and Removing the Memory Card
1. Turn the POWER switch to OFF.
• When removing the memory card, make sure the card access indicator is off.
2. Open the memory card compartment cover in the direction of the arrow.
3. Insert or remove the memory card.
• Push the memory card all the way in.
• Remove the memory card by pushing the card in and letting it spring out.
4. Close the memory card compartment cover.
• When inserting the memory card, do not attempt to close the cover forcefully without the
memory card properly inserted.
Notes:
• When you set the camcorder to CARD PLAY (VCR) mode, the last image recorded appears. If
there are no images recorded on the memory card, NO IMAGES appears in the display.
• Do not touch the memory card terminals.
Do not attempt to pull the memory card out without first pushing it in.
Still image Quality: Fine, Standard
To change the image quality, open the menu and select CARD SET UP. Then select
QUALITY, set it to STANDARD and close the menu.
• The image quality may not differ between the settings depending on the still image.
QUALITY••••• FINECARD SET UP
( 18)
113
E
Using a Memory Card
+
,
+
CAMERA
CARD
PLAY
(VCR)
TAPE
Selecting the Image Quality

Canon XM2 Specifications

General

Sensor type	CMOS
Total megapixels	4.7 MP
Optical sensor size	1/4 \
Filter size	58 mm
Digital zoom	100 x
Optical zoom	20 x
Focal length range	4.2 - 84 mm
Display diagonal	2.5 \
Operating temperature (T-T)	0 - 55 °C
Minimum illumination	0.37 lx
Auto focus	Yes
PictBridge	No
Camcorder tape type	Mini-DV
Compatible memory cards	MMC, SD
Battery life (max)	7 h

Weight and Dimensions

Depth	306 mm
Width	118 mm
Height	136 mm
Weight	1120 g