Canon XM2 - Page 64

64
E
Recording
1. Press the D.EFFECTS/BARS SELECT button.
• The digital effects menu appears.
2. Select EFFECT and press the SELECT dial in.
• The settings appear.
3. Select the effect setting and press the D.EFFECTS/BARS SELECT button.
• The menu closes and the name of the selected effect flashes in the display.
4. Press the D.EFFECTS/BARS ON/OFF button.
• The name of your selection stops flashing and the effect is activated.
• Each time you press the D.EFFECTS/BARS ON/OFF button, the effect becomes activated
(display lights continuously) or deactivated (display flashes).
+
CAMERA
TAPE
Operating the Effects
EFFECT•••••••BLK&WHTEFFECT
( 18)