Why does a speaker show WLS in the display of my Canton Speaker System?
If a speaker shows WLS in the display of your Canton Speaker System, it means the slave speaker is being operated without the Soundbar. Turn on the Soundbar. If that's not the case, the slave speaker is not paired yet, pair the slave speaker with the Soundbar.
How to fix a Canton Smart Soundbar 10 Speaker System Soundbar 9 that doesn't respond to the remote?
If your Canton Soundbar 9 isn't responding to the remote control, first, ensure you've removed the protective film from the remote. If that doesn't work, replace the battery, making sure to insert it with the correct polarity.
Why is there no playback via Bluetooth on my Canton Smart Soundbar 10 Speaker System?
If you're experiencing no playback via Bluetooth on your Canton Speaker System, there could be several reasons: * Ensure there is a connection between the Soundbar 9 and your mobile device. * If the device is paired but not playing, try reconnecting it. * Set the volume on your mobile device to the maximum. * Increase the volume on the Soundbar 9. * Ensure that there are no sources of interference (such as a WiFi router or laptop) near the Soundbar 9. * If you're using both WiFi and Bluetooth from a mobile device, disable WiFi or reduce the distance between the Soundbar and the mobile device.
How to fix Canton Soundbar 10 remote control not working?
If your Canton Soundbar 10 isn't responding to the remote, start by checking if you've removed the protective film from the remote control. Also, the battery might be empty, so replace it, ensuring you insert it with the correct polarity.
Why does the subwoofer not reproduce sound in my Canton Smart Soundbar 10 Speaker System?
If the subwoofer in your Canton Speaker System isn't producing sound, it may not be paired yet. Pair the slave speaker with the Soundbar. Also, if the subwoofer is connected to the Soundbar using an RCA cable, ensure that Sub Out is activated (ON) in the Sub Out menu.
Why does my Canton Soundbar 10 switch off automatically?
If your Canton Soundbar 10 is automatically switching off, it could be due to the standby function ECO, AUT, or NSB being activated. Try selecting the standby function MAN. Also, the infrared command for Standby might have been learned incorrectly; relearn the infrared command for Standby.
What to do if the BT input cannot be selected via the “Input” buttons on my Canton Speaker System?
If the BT input cannot be selected via the “Input” buttons on your Canton Speaker System, it's likely that the function BT Select [BTS] is activated. In this case, switching happens automatically when the Soundbar 9 detects an audio signal from the device. If this is unwanted, set BT Select (BTS) to manual.
How to make my Canton Speaker System Soundbar 9 automatically switch to the BT input?
If your Canton Soundbar 9 isn't automatically switching to the BT input, the BT Select function is likely deactivated (MAN). Activate the BTS function (AUT) to enable automatic switching. Also, ensure that Bluetooth® is enabled on your device, that the Soundbar 9 isn't connected to another device (disable Bluetooth® on other devices), and that your device is paired with the Soundbar 9.
Why doesn't my Canton Soundbar 10 turn off automatically?
If your Canton Soundbar 10 isn't turning off automatically, the standby function MAN might be activated. Activate the standby function ECO, AUT, or NSB. Alternatively, if the standby function AUT or NSB is activated, the source device may be transmitting a carrier signal in standby mode (optical or coaxial digital input, only). In this case, disconnect the source device from the mains or manually switch off the Soundbar 10.
How to increase the volume on my Canton Smart Soundbar 10 Soundbar 9 if the sound reproduction is too soft?
If the sound reproduction on your Canton Speaker System Soundbar 9 is too soft, increase the volume using the “Volume” button, and also increase the volume of the source device. Also, ensure that the maximum possible volume hasn't been limited by the “Volume” function (VOL); if it has, increase the maximum possible volume according to the instructions.
General| Audio decoders | DTS Digital Surround, DTS TruSurround, Dolby Digital |
|---|---|
| RMS rated power | 300 W |
| Audio output channels | 2.1.2 channels |
| Audio Return Channel (ARC) | Yes |
| Woofer diameter | 79 mm |
| Tweeter diameter | 19 mm |
| Mid-range driver diameter | 50 mm |
| Woofer diameter (imperial) | 3.1 \ |
| Tweeter diameter (imperial) | 0.75 \ |
| Mid-range driver diameter (imperial) | 2 \ |
| HDMI in | 3 |
| Bluetooth version | 4.0 |
| HDMI ports quantity | 4 |
| Number of HDMI outputs | 1 |
| Connectivity technology | Wired & Wireless |
| Cables included | AC, Audio (3.5mm), Coaxial, HDMI, Optical |
| Receiver included | - |
| FM radio | No |
| Display type | LED |
| Certification | CE |
| Product color | Silver |
| Bluetooth range | 10 m |
| Transmission frequency | 2.4 GHz |
| Apple docking compatibility | Not supported |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 / 60 Hz |
| Soundbar power consumption | 150 W |
| Power consumption (standby) | 0.4 W |
Weight and Dimensions| Depth | 100 mm |
|---|---|
| Width | 990 mm |
| Height | 70 mm |
| Soundbar weight | 5300 g |
To Next Page
