Need help?Do you have a question about the Canton DIGITAL MOVIE and is the answer not in the manual?
General| Type | Soundbar |
|---|---|
| Configuration | 2.1 |
| Subwoofer | Wireless |
| Weight (Soundbar) | 3.5 kg |
| Inputs | Optical |
Key safety guidelines for operating the Canton DM system, covering electrical hazards, placement, and environmental conditions.
Lists all components included in the DM 1 and DM 2 digital movie systems for user reference.
Recommendations for optimal placement of the central speaker and satellites relative to the TV and listening position.
Detailed identification of all input and output terminals on the subwoofer for various audio and system connections.
Instructions on connecting speaker cables to the subwoofer, including polarity and cable length considerations.
Guide for connecting different audio and video sources like DVD players, VCRs, and satellite receivers to the system.
Details on connecting the FM antenna and utilizing LINE OUT/ZONE 2 outputs for audio recording or multi-room systems.
Explanation of the different buttons on the remote control and their primary functions for system operation.
Instructions on how to turn the DM system on, put it into standby mode, and activate the remote control.
Guidance on adjusting volume levels and navigating through the system's menus using the remote control.
Steps to power on the DM system and select various audio/video sources for playback.
Describes the available sound modes, including stereo, virtual surround, and 5.1 surround, and their usage.
Procedure for setting up speakers, measuring distances, and adjusting volumes using test tones for optimal sound.
Visual representation and instructions for setting speaker distances for DM 1 and DM 2 systems.
Configuration of output settings (Line Out/Zone 2) and tips for room compensation to fine-tune treble and bass.
Explanation of the bass expander function and lip sync adjustment for synchronizing audio with video.
Guidance on setting the 'dynamic' mode for optimal playback of 5.1 multi-channel recordings.
Instructions for using the integrated FM tuner, including searching, tuning, and memorizing radio stations.
How to select source devices (DVD, Sat, TV, CD, etc.) to enable the remote control to learn their functions.
Step-by-step process for programming the remote control to operate other infrared-controlled devices.
Details on the wireless (RF) mode of remote control programming, including successful and failed transfers.
Functions available directly on the subwoofer, including volume, play mode, source selection, and standby control.
Accessing and adjusting service-level settings like i2C, start-up volume, volume limiter, and system presets.
Solutions for common remote control display errors, connection failures, and no-connection messages.
Troubleshooting steps for issues like no sound, incorrect input selection, or problems with Sat/DVD inputs.
Resolving problems related to virtual surround effect, satellite volume imbalance, and volume limiter impact.
Addressing issues with Dolby/DTS recognition, center speaker absence in 5.1 mode, and stereo mode selection.
Guidance on adjusting treble and bass levels to optimize sound quality based on room acoustics and speaker placement.
Information on optimal subwoofer positioning and resolving audio-video synchronization issues using lip sync.
Troubleshooting remote control mode switching between IR and operation, and device selection failures.
Solutions for issues during recording, such as recording too quiet, distorted sound, or volume control problems.
Guidelines for cleaning and maintaining the loudspeaker housings to ensure longevity and preserve appearance.
Explanation of the necessary running-in period for loudspeakers to achieve optimal performance and sound quality.
Details on the warranty period, coverage, exclusions, and claim procedures for Canton loudspeaker systems.
To Next Page