What to do if the BT input cannot be selected via the “Input” buttons on my Canton Smart Soundbar 9 Speaker System?
If the BT input cannot be selected via the “Input” buttons on your Canton Speaker System, it's likely that the function BT Select [BTS] is activated. In this case, switching happens automatically when the Soundbar 9 detects an audio signal from the device. If this is unwanted, set BT Select (BTS) to manual.
How to fix a Canton Speaker System Soundbar 9 that doesn't respond to the remote?
If your Canton Soundbar 9 isn't responding to the remote control, first, ensure you've removed the protective film from the remote. If that doesn't work, replace the battery, making sure to insert it with the correct polarity.
Why is there no playback via Bluetooth on my Canton Speaker System?
If you're experiencing no playback via Bluetooth on your Canton Speaker System, there could be several reasons: * Ensure there is a connection between the Soundbar 9 and your mobile device. * If the device is paired but not playing, try reconnecting it. * Set the volume on your mobile device to the maximum. * Increase the volume on the Soundbar 9. * Ensure that there are no sources of interference (such as a WiFi router or laptop) near the Soundbar 9. * If you're using both WiFi and Bluetooth from a mobile device, disable WiFi or reduce the distance between the Soundbar and the mobile device.
What to do if Canton Smart Soundbar 9 Speaker System Soundbar 9 does not turn on?
If your Canton Speaker System Soundbar 9 doesn't turn on, make sure the mains cable is properly connected to both the power outlet and the Soundbar 9.
How to increase the volume on my Canton Smart Soundbar 9 Soundbar 9 if the sound reproduction is too soft?
If the sound reproduction on your Canton Speaker System Soundbar 9 is too soft, increase the volume using the “Volume” button, and also increase the volume of the source device. Also, ensure that the maximum possible volume hasn't been limited by the “Volume” function (VOL); if it has, increase the maximum possible volume according to the instructions.
Why does my Canton Smart Soundbar 9 Soundbar 9 switch off automatically?
If your Canton Soundbar 9 is switching off automatically, it might be due to the standby function being activated (ECO, AUT, LAN, or NSB). To prevent this, select the standby function MAN. Also, the infrared command for Standby may have been learned incorrectly. In this case, relearn the infrared command for Standby.
What to do if two speakers play the same channel on my Canton Smart Soundbar 9 Speaker System?
If two speakers are playing the same channel on your Canton Speaker System, it means two slave speakers were assigned the same channel during pairing. Use the test tone to identify the speaker playing the wrong channel. Then, reconnect this speaker as described in WSP (Wireless Speaker Pairing) and select the correct channel.
Why can't an input be selected via the Input buttons on my Canton Smart Soundbar 9 Speaker System?
If an input cannot be selected via the Input buttons on your Canton Speaker System, it's likely that the input was deactivated in the Input Config [INP] menu. Activate the input according to the instructions in the Input Config [INP] section.
Why does Canton Smart Soundbar 9 Speaker System Soundbar 9 unintentionally switch on?
The Canton Soundbar 9 may unintentionally switch on when your mobile device plays system sounds (like keyboard typing), a digital source is turned on, or an analog source is playing. Change the standby function from AUT to ECO, NSB, LAN, or MAN to prevent this.
Why does my Canton Smart Soundbar 9 device unintentionally change the input?
If your Canton device unintentionally changes the input, it could be because the Input Select [SEL] function is set to AUT, and the currently selected input AUX (Line) has a long break in playback (over 10 seconds), while a signal is present at another input, or the source device is turned on at the optical and coaxial input. Ensure that no signal is present at any other input during playback at the Line, Balanced and USB inputs, or that a device is switched on at the optical and coaxial digital input. This can also happen when your mobile device issues system sounds; disable these system sounds on your device. Alternatively, set Input Select [SEL] or BT Select function to MAN (manual).
General| Audio decoders | DTS Digital Surround, DTS TruSurround, Dolby Digital |
|---|---|
| RMS rated power | 300 W |
| Audio output channels | 2.1 channels |
| Audio Return Channel (ARC) | Yes |
| Tweeter diameter | 19 mm |
| Mid-range driver diameter | 50 mm |
| Tweeter diameter (imperial) | 0.75 \ |
| Mid-range driver diameter (imperial) | 2 \ |
| Subwoofer type | Passive subwoofer |
| Cables included | AC, Audio (3.5mm), Coaxial, HDMI, Optical |
| Receiver included | No |
| Display type | LED |
| Certification | CE |
| Product color | Black |
| HDMI in | 3 |
| HDCP version | 2.2 |
| Bluetooth version | 4.0 |
| HDMI ports quantity | 4 |
| Number of HDMI outputs | 1 |
| Connectivity technology | Wired & Wireless |
| Bluetooth range | 10 m |
| Bluetooth profiles | A2DP |
| Transmission frequency | 2.4 GHz |
| Apple docking compatibility | Not supported |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 / 60 Hz |
| Soundbar power consumption | 150 W |
| Power consumption (standby) | 0.4 W |
Weight and Dimensions| Depth | 100 mm |
|---|---|
| Width | 890 mm |
| Height | 70 mm |
| Soundbar weight | 5100 g |
To Next Page
