Step 10 — Connect Your Printer to the Hub
Now that your CANVAS Hub can talk wirelessly to your desktop computer, connect your Hub to
your printer. Depending on your printer's USB slots, select the provided USB-B or micro-USB
cable. Insert the USB-A side into any port of your Hub and the other end into your printer.
Once the cable is connected, connect your printer onto OctoPrint by selecting Connect on the
main screen under Connection. The Connection tab will minimize once the printer is connected to
CANVAS Hub. You'll also notice that the State will read Operational in the State tab.
This document was generated on 2021-12-23 02:43:54 AM (MST).
© 2021 support.mosaicmfg.com/ Page 12 of 15
To Next Page
Loading...
General