Step 2 — Turn On the Hub
Find a spot to setup your CANVAS
Hub. We recommend positioning
your Hub closer to a router if your
printer setup permits it and ensuring
that the USB cable connected to
your printer is long enough to reach
the Hub without getting in the way of
any of your printer axes during
movement.
Connect your power supply to the
outlet and CANVAS Hub. Check
that your indicator light turns on.
Once connected, please wait
approximately 3 minutes to initialize
and set up an access point to
connect.
We recommend waiting for the
entire 3 minute duration as trying to
access your CANVAS Hub interface
too early can cause it to reset and
prolong the process of getting itself
setup.
To Next Page
Loading...
General