Operation
-34-
4
Working
Inspecting Cutting Blade
Inspect cutting blade before work. Refer to Cutting Blades (page 65) for inspection
procedure.
Adjusting Cutting Height
5335M-0403-010E
Cutting Height Lock
Cutting Height Adjust Lever
1. Grab cutting height lock to unlock cutting height
adjust lever.
5332M-0403-020E
Cutting Height Adjust Lever
2. With lock button pulled up, move cutting
height adjust lever to a desired position.
3. Release lock to lock cutting height adjust
lever.
• Cutting Height Range: 0mm - 150mm (CMX227, CM226)
0mm - 130mm (CMX186, CM185)
• Cutting Height indicated on the side of the adjust lever is for reference purpose
only; actual cutting height may vary due to the condition of ground or brush, and
other factors.
NOTE
To Next Page
Loading...
