CanyCom CM1802 - User Manual

Ride-on Brushcutter
CM1802
OPERATOR'S MANUAL
WARNING
Read and understand this manual completely before attempting
to operate, maintain, and inspect this machine.
Keep this manual with care so that it may be consulted in oper-
ating, maintaining, or inspecting this machine.
5324 5201 000
CHIKUSUI CANYCOM, INC.
90-1 Fukumasu, Yoshii-machi,
Ukiha-shi, Fukuoka, Japan 839-1396
Tel. +81-(0)943-75-2195 Fax.+81-(0)943-75-4396

Summary

1. Introduction

1.3 Warning Terms Used in This Manual

Defines hazard warning terms like DANGER, WARNING, CAUTION, and NOTE.

1.4 Safety Labels Explained

Shows and explains safety labels attached to the machine.

3. Safety

3.1 Safety Precautions

General safety rules for operating and maintaining the machine.

3.1.1 Operator Training

Emphasizes receiving practical instructions for safe operation.

3.1.2 Pre-Operation Preparation

Lists safety measures before operating the machine.

3.1.3 Operation Safety

Covers general driving and operational safety precautions.

3.1.4 Servicing Safety

Details safety precautions during machine servicing.

4. Controls and Components

4. Function of Components

6. Operation

6.1 Preparation Steps

6.1.1 Checking and Filling Fuel

6.1.2 Inspecting and Filling Engine Oil

6.1.3 Inspecting and Filling HST Oil

6.2 Starting the Engine

Step-by-step instructions for starting the engine.

6.3 Driving the Machine

Guidance on how to drive the machine safely and effectively.

6.4 Stopping the Machine

Procedures for safely stopping the machine.

6.5 Parking Procedures

6.9 Working Operations

Guidance on performing work operations with the machine.

7. Maintenance

7.1 Maintenance Schedule

Outlines regular inspection and maintenance tasks.

7.2 List of Fluids and Lubricants

7.4 Fluids and Lubricants Details

7.5 Greasing and Oiling

7.6 Electrical System Maintenance

7.8 Adjusting Components

7.9 Replacing Parts

8. Storage

8.3 Engine Storage Preparation

8.3.3 Engine Oil Change for Storage

9. Troubleshooting

9.1 Troubleshooting Chart

Provides a chart of malfunctions, causes, and corrective actions.

10. Transporting

10. Loading and Unloading Procedures

CanyCom CM1802 Specifications

General

Brand	CanyCom
Model	CM1802
Category	Brush Cutter
Language	English