EasyManua.ls Logo

CanyCom CM1802 - 7.9 Replacing Parts

Default Icon
63 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5324M-0709-010E
Stick-like Object
Blade Tool (Optional)
7.9.2 Hoses
Rubber products, such as fuel hose, engine oil drain hose,
and HST oil tank hose deteriorate even if they are not used.
Replace them and their cramps with new ones every three
years.
(Replace them when damaged.)
– 45
7
Maintenance
7.9 Replacing
7.9.1 Oil Filter Cartridge
Replace oil filter cartridge every 100 hours of operation.
1. Before installing new filter, apply new oil on filter gasket.
2. Follow instructions in operator's manual for the engine to
install new filter.
3. Remove oil gauge and fill new oil of specified grade.
4. Check oil level.
5. Start engine and check for leaks.
7.9.3 Cutting Blades
When handling cutting blade, wear thick gloves
or wrap blade with cloth. Handle blades careful-
ly in order to prevent injuries.
1. Open right hand side of cutting blade shield.
CAUTION
Cutting
blade shield
Oil filter
Oil drain plug
2. Hold blade with a strong stick-like object (such as screw
driver) or optional blade tool.

Related product manuals