6
6.5 Parking
Even when rotary clutch lever is in [OFF] posi-
tion, cutting rotary (blade) may still be turning
due to inertia. Do not get off machine until
rotary is completely stopped.
1. Stop machine as described in Stopping.
2. Turn off engine and remove key.
3. Move cutting rotary clutch lever to [OFF] position.
4. Move cutting height adjust lever to [Transport] position.
6.6 Transporting in Case of Emergency
If machine does not operate with normal control
due to engine failure, etc., do not force it to
move. Transport machine with the following pro-
cedure.
1. Move drive lever and auxiliary transmission shift lever to
[Neutral] position.
2. Move cutting helght adjust lever to [Transport] position.
3. Release parking brake lock lever and move machine.
– 22 –
Operation
7. Close fuel cock.
Cutting height
adjust lever
Rotary clutch
lever
Parking brake
lock lever
Open
Close
To Next Page
Loading...
