6
1. Make sure cutting blade shield is closed.
2. Stop machine and move throttle lever to a position between
[High speed] and [Low speed].
3. Move cutting height adjust lever to position [5].
– 24 –
Operation
6.9 Working
Never put any part of your body under cutter
blade shield. Severe injury or death may result.
• When using machine for the first time, select
a flat ground and operate slowly so that
each cutting paths overlaps.
•
When cutting around obstacles, always position
trees, posts, and other obstacles on the left
side of the machine. (Make leftward turning.)
• Before carrying out work, be sure to read
Operating in Chapter 3 Safety. ( Page 5)
To Next Page
Loading...
