4
Controls and Components
– 11 –
Function of Components
• Main Switch .......................Starts or stops engine.
*When machine is not in use, remove key.
• Throttle Lever .....................Increases and decreases engine speed.
• Choke Knob .......................When choke knob is pulled, choke valve closes, and when it is
returned, choke valve opens. Pull choke knob when starting engine
and return it after engine is started.
• Drive Lever ........................Drive lever changes the discharge of hydraulic pump in HST and
changes the travelling speed and direction in a stepless manner.
When drive lever is pushed forward from neutral position, machine
moves forward. Pushing lever backward makes machine travel back-
ward. Speed increases proportional to the angle of lever.
•Aux. Transmission Shift Lever ....Use this lever when shifting auxiliary transmission to high/low gear.
• Brake Pedal .......................Stops machine.
When depressing brake pedal, drive lever returns to neutral and
machine stops.
• Differential Lock Lever ............Use this lever when one side of the rear wheels is slipping.
When lever is pushed to [ON], differential lock is engaged. When
lever is [OFF], differential lock is released (normal driving position).
* During normal driving, always put the lever to [OFF] position.
• Head Lamp Switch.................Head lamp is turned on when switch is pulled.
•Parking Brake Lock Lever ........After stopping machine, pull lock lever downward to lock brake
pedal.
• Cutting Height Adjust Lever ........Adjusts the height of blade (5 steps)
• Rotary Clutch Lever ...............Turns on and off the power to cutting rotary.
When moving this lever to [OFF] position, rotary brake is applied.
• Grass Outlet ......................Secure area around machine before opening. Opening outlet allows
cut grass to be easily removed. Open outlet when changing cutting
blades.
* Outlet should be closed during normal use to prevent debris or
other objects from being thrown from machine.
To Next Page
Loading...
