-73-
Maintenance 5
5332M-0509-020E
Main Fuse
Fuse Case
Cap
Lights Fuse
1. Open engine hood.
2. Open fuse case cap. Remove fuse and
visually inspect. If it is blown, replace it with
new one of the same rating.
3. Install fuse.
4. Install fuse case cap.
5. Close engine hood.
Fuses
• If a fuse blows, investigate the cause before replacing.
• Always replace a fuse with one of the correct rating.
• Main Fuse: 30A. Lights Fuse: 10A
• Replacement Fuse: Page 49.
NOTE
Light Bulbs
• When light bulb is burnt out, replace it with a new bulb.
• When replacing, always use a bulb of the correct rating. Wrong bulb may cause
malfunction or damge in electrical system.
• Do not touch bulb when it is hot. It may cause burns.
• Do not touch the glass part of light bulb directly with fingers. It may reduce
service life.
To Next Page
Loading...
