Caple C864I - Control Panel and Display; Appliance Usage Overview

10
Timer display
Power selection zone “SLIDER”
and timer setting zo
ne
Power display
Control light
on/
off
Control light
cooking zone
Control light timer
Control light
Stop &
Go
On/off
key
Power
key
Stop & Go
key
Control panel
USE OF THE APPLIANCE
Display
Display Designation Function
0. Zero The heating zone is activated.
1…9 Power level Selection of the cooking level.
U No pan detection No pan or inadequate pan.
A Heat accelerator Automatic cooking.
E Error message Electronic failure.
H Residual heat The heating zone is hot.
P Power The boosted power is activated.
L Locking Control panel locking.
II Stop&Go The hob is paused.
Ventilation
The cooling system is fully automatic. The cooling fan starts with a low speed when the energy
brought out by the electronic system reach a certain level. The ventilation will run at high speed
when the hob is intensively used. The cooling fan reduces speed and stops automatically when
the electronic circuit is cooled enough.