18
One or all cooking zone cut-off:
• The safety system functioned.
• You forgot to cut-off the cooking zone for a long time.
• One or more sensitive keys are covered.
• The pan is empty and its bottom overheated.
• The hob also has an automatic reduction of power level and breaking Automatic
overheating.
The control panel displays [ L ]:
• Refer to the chapter control panel locking page.
The control panel displays [ Er03 ]:
• An object or liquid covers the control keys. The symbol disappears as soon as the key is
released or cleaned.
The control panel displays [ E2 ] or [ EH ]:
• The hob is overheated, let it cool and then turn it on again.
The control panel displays [ E3 ]:
• The pan is not adapted, change the pan.
The control panel displays [ E5 ]:
• Defective network. Control the voltage of the electrical network.
The control panel displays [ E6 ]:
• Defective network. Control the frequency of the electrical network.
The control panel displays [ E8 ]:
• The air inlet of the ventilator is obstructed, release it.
The control panel displays [ U400 ]:
• The hob is not connected to the network. Check the connection and reconnect the hob.
If one of the symbols above persists, contact Caple Service.
T - 0117 938 7420
E - service@caple.co.uk.
To Next Page
Loading...
