Instruction manual C894C 15
Please keep this instruction manual for future reference
USING YOUR CERAMIC HOB
TO START COOKING
When the power to the hob is turned on, the buzzer sounds once, all
the indicators light up for 1 second and then go out, indicating that the
ceramic hob has entered standby mode.
To turn on touch the ON/OFF control
. All the indicators then
show “ “.
Place a suitable pan on the cooking zone that you wish to use.
Make sure the bottom of the pan and the surface of the cooking zone
are clean and dry.
Touch the heating zone selection control.
Select a heat setting by touching the “
“ or “ ” control.
If you do not choose a heat setting within 1 minute, the ceramic hob will
automatically switch off. You will need to start again at step 1.
You can modify the heat setting at any time during cooking.
To Next Page
Loading...
