Instruction manual C894C
28
Please keep this instruction manual for future reference
CAUTIONS
› The hob must not be mounted to cooking equipment, dishwashers and rotary dryers.
› The ceramic hob shall be installed such that better heat radiation can be ensured to enhance its
reliability.
› The wall and induced heating zone above the work surface shall withstand heat.
› To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
› A steam cleaner is not to be used.
› This hob can be connected only to a supply with system independence no more than
0.427 ohm. In case necessary, please consult your supply authority for system
impedance information.
To Next Page
Loading...
