14
TIMING
- As a result of the new EU65 “Energy label” and EU66 “ Ecodesign” regulations
issued by the European Commission, which came into force as from January 1st,
2015 , our products have been adapted to comply with these new requirements.
All of the models complying with the energy label requirements, are equipped
with new electronics including a timer device for speed controls, when the air
capacity exceeds 650m³/h.Internal motor models, with maximum air capacity
higher than 650m³/h, are equipped with a timer device that automatically switches
the speed from 4th to 3rd speed, after 5 minutes operation.
- External motor models are equipped with remote motors that , as for internal
motor versions, include a timer device that switches down the speed when it
exceeds 650 m³/h. (See External Motors Instructions). Remote motors, whose air
capacity exceeds 650m³/h at both 4th and 3rd speed, will have the following by
default timer control functions: The speed is automatically switched from 4th to
2nd speed, after 6 minutes operation.
- If the appliance is working at 3rd speed, it is automatically switched to 2nd
speed, after 7 minutes operation. Operation speeds can also be changed during
operation.The energy consumption of the appliance in standby mode is lower than
0.5W.
To Next Page
Loading...
