Car-O-Liner Group AB CTR12000
46 41644, EN - rev. 2, 2012-09
Export of data
After entering the field Export, following window appears on the screen:
In that menu you can export the individual welding programs with the modi-
fied parameters to an USB-stick. If you want to store your individual pro-
grams, choose UserDB.
SpotQS logfile export
To copy the SpotQS logfile, you have to insert the USB- Stick to the USB-
Drive of the machine. Choose SpotQS logfile export to transfer the QS- da-
ta to the USB- stick. Please also read the additional instruction manual: Ana-
lysing Spot- QS datasheets.
To Next Page
