8555-M313-O1 Rev H • 204 Installation & Technical
1
SPECIFICATIONS
Power Requirements: 100 to 240 VAC 50/60Hz 12 VDC 1A wall plug-in UL/CSA
listed AC power adapter (Cardinal part number 6800-1045)
OR (6) C cell batteries, Alkaline, Ni-Cad or NiMH (batteries
not included)
Operating Temperature: 14 to 104 ºF (-10 to +40 ºC)
Display: Six digit, seven segment, 1" high LCD
Sensitivity: 1.2uV/division (0 to 3.0 mV/V), Class III
Signal Input Range: 0.2mV to 15mV max.
Transducer Excitation: 5.0 VDC
Number of Load Cells:
up to 4 each 350Ω
Load Cell Cable Length: 30 feet max.
Resolution: 5,000 divisions
Capacities: 1,000 to 5,000 divisions commercial
up to 10,000 divisions noncommercial
Division Value: 1, 2, 5 or 10 x 1, 0.1, 0.01, 0.001
Sample Rate: 1 to 10 samples per second selectable
Auto Zero Range: 0.5 or 1 through 9 divisions
Weighing Units: Pounds, kilograms, ounces or grams
Keyboard: Membrane type with 7 keys
Enclosure Size: 8" W x 6 5/8" H x 2 1/8" D (204 x 168 x 54mm)
Enclosure Construction: 304 Stainless Steel
Weight: 2.1 lb (without batteries) – 3.1 lb (with batteries)
Certifications
This equipment is certified to comply with the requirements for a Class III/IIIL device by the
• National Conference on Weights and Measurements (Certificate No. 02-016A1)
• Measurement Canada (Approval No. AM-5436)
• Australian Government National Standards Commission (Approval No. S430)
• And for accuracy Class III and IIII by OIML (Certificate No. R76/1992-DK-02.03)
To Next Page
Loading...
