Need help?Do you have a question about the Cardinal 220 and is the answer not in the manual?
General| Brand | Cardinal |
|---|---|
| Model | 220 |
| Category | Accessories |
| Language | English |
Instructions for physically mounting the 220 indicator enclosure.
Steps for connecting the load cells to the indicator.
Explains the function of the AUTO-ON jumper.
Explains the ACTIVE REMOTE OUT jumper for sourcing 5VDC.
Describes the ACTIVE REMOTE IN jumper for remote input circuits.
How to enter the setup mode using the calibration switch.
Initiates the calibration process for the instrument.
Allows for fine span adjustment during calibration.
Setting the first calibration weight value.
Setting the second calibration weight value.
Lists and explains various error codes displayed by the indicator.
Error indicating load cell input is too high.
Error indicating load cell input is too low.
Error indicating E2PROM checksum failure.
Indicates an invalid keypad entry was attempted.
Errors related to the Analog to Digital converter chip.
Indicates a key has been locked out.
Error for display overflow (too many digits).
Error indicating unstable weight during operation.
To Next Page
