18
8.2 PARTS LIST
This section lists parts which are interchangeable by field or factory service personnel. Refer
to the MSB-25 exploded view in section 8.1 for the location of each item. Unless otherwise
noted, the quantity of each item is 1.
Item Description Part
1 Enclosure bottom housing 8540-C201-0A
2 Enclosure trim panel, silkscreened 8540-D215-08
3 Subpanel 8540-D214-08
4 Top cover 8540-C204-0A
5 Weighing platform 8540-C211-08
6 Weighbridge 8540-C208-0A
7 Level Indicator 6690-0001
8 Load cell, 25 lb, with cable 2950-C009-4A
9 Adjustable leveling foot (4 per assembly) 6540-1011/6540-1012
10 Pull-out instruction placard 8540-C213-0A
11 Keypad, 24 key, full travel 8540-D207-0A
12 LED display board 8540-D206-0A
13 Display, alphanumeric, dot matrix, 20 char. 8542-D013-1A
14 Controller board 8540-D034-2A
15 Serial I/O board 8540-D205-0A
16 Analog board 584GR670
17 Calibration set-up switch 8540-B033-08
18 Power cord, grounding, molded plug, SJO, 12' length 8540-B049-1A
19 Power switch, rocker 6910-5095
20 Fuse holder 6610-4046
21 Fuse, 3AG, 1/4 ASB 6610-4019
22 Identification plate 593M729
23 Serial interface connector 8540-C216-0A
24 Test button 8540-B226-0A
To Next Page
Loading...
Need help?
General