If your DMC group splits with some group members remaining in range of each other but not in range of all
group members, you can continue speaking with the members still in range. Once in range of any other group
member, you automatically reconnect.
If you join a new DMC group, you automatically leave your existing DMC group.
● If you purchased the PACKTALKEDGE DUO, the package contains two units belonging to the same
DMC intercom group. No group creation is required.
5.1.1.1 CREATING DMC INTERCOM GROUPS
1. All the riders press for 5 seconds. The LED flashes red and green. quickly.
2. After each member joins successfully, the LEDs of the joined unit flash purple.
After grouping is completed, the DMC intercom conference starts automatically.
5.1.1.2 JOINING DMC INTERCOM GROUPS
You can join or rejoin a DMC intercom group previously created.
To join an existing DMC group:
1. Press for 5 seconds. The LED flashes red and green quickly.
The color of the flashing LEDindicates whether you have been added to the group:
● Purple: You have successfully joined the group.
● Yellow: You cannot join the group because it has already reached the maximum number of riders.
● Red: Failed to join.
2. The group admin allows the additional rider by selecting "Add a rider" in the Cardo Connect App.
5.1.1.3 LEAVING DMC INTERCOM GROUPS
If you leave a DMC intercom group, you must rejoin it if you want to connect to it again in the
future.
You can leave a DMC group with Cardo Connect App or by doing a full factory reset.
5.1.2 USING DMC INTERCOM
5.1.2.1 ADDING A NON-DMC PASSENGER
You can use the DMC bridging feature to add a non-DMC passenger to the intercom group.
19
To Next Page
Loading...
Need help?
General
