5.1.1.3 LEAVING DMC INTERCOM GROUPS
You can leave a DMC group , by deleting the group from the Cardo Connect App or by doing a full factory
reset.
If you leave a DMC intercom group, you must rejoin it if you want to connect to it again in the
future.
5.1.2 USING DMC INTERCOM
5.1.2.1 ADDING A NON-DMC PASSENGER
You can use the DMC bridging feature to add a non-DMC passenger to the intercom group.
To bridge a non-DMC passenger:
To add a Bluetooth passenger, use the Cardo Connect App:
To start/stop a non-DMC passenger intercom:
● Tap 3 times.
5.1.2.2 CHATTING PRIVATELY
You can chat privately with a specific member of your DMC group.
This option is also available using the Cardo mobile app.
To chat privately:
1. In the Mobile app, select the rider you want to speak to in private
20
To Next Page
Loading...
Need help?
General
