3. Tap “MM” within 20 seconds of nding the FM station to save it
as the current Preset.
4. To continue scan: Wait for the next station to be found.
NOTE: During Scan, tap the “MM” button to fast save the current
FM station as the current Preset
7.3 AUTOMATIC RADIO TUNING
This feature makes nding new stations fast and easy by automatically
creating a temporary list of 6 “on-the-go” radio stations.
1. Turn on the Radio.
2. Press “V-” for 5 seconds.
3. Your scala rider will search upwards (higher frequency) from the
current station and store the next 6 FM stations it discovers as
“on the go” stations.
4. If desired, repeat Step 2 to store the next 6 FM stations as “on the
go” stations.
NOTE: These 6 temporary “on the go” stations cannot be saved and
do not replace the FM Presets you may have saved.
Turning o your scala rider will clear the Automatic Radio Tuning
stations and restore the FM Presets.
7.4 RDS RADIO DATA SYSTEM
RDS allows your scala rider to automatically retune to the
strongest frequency available for the FM station you are listening
to when the signal becomes too weak.
RDS ON/OFF
(Default: O)
With Radio ON, press “V+” and “V-” simultaneously
for 2 seconds
8. TROUBLESHOOTING
Reboot If your scala rider stops responding, reset it by turning
it o and then on again (press “IC” for 2 seconds
)
.
Reset Pairing
(Deletes all
paired devices)
1. In Standby, press “V+” for 5 secs until LED ashes
RED/BLUE.
2. Press “MM” for 2 seconds until LED ashes 5 times
in PURPLE.
9. SUPPORT
For additional information:
www.cardosystems.com
support@cardosystems.com
USA and Canada: 1-800-488-0363
International: +49 89 450 36819
IMPORTANT
MULTINATIONAL E-COMMERCE COMPANIES AND ONLINE AUCTION WEBSITES ARE NOT
AUTHORIZED TO SELL CARDO PRODUCTS AND PURCHASES FROM SUCH SITES ARE AT YOUR OWN
RISK. TO RECEIVE WARRANTY OR CUSTOMER SERVICE, YOU MUST SUBMIT ORIGINAL RECEIPTS
FROM AUTHORIZED CARDO DEALERS.
PRODUCTS THAT WERE IMPORTED FROM NORTH AMERICA MUST BE SERVICED IN THE USA.
12
| scala rider
®
Q1 / Q1 TeamSet™