29Heosone +050002740 rel. 1.1 - 17.05.2021 Checks before commissioning
ENG
Code Description Def Min Max UOM
Fd Post-dripping time after defrost (fans off with control active) 2 0 15 min
tS1-d Start time band 1 - day 0 0 11 -
0 = disabled 6 = Sat
1 = Mon 7 = Sun
2 = Tue 8 = Mon to Fri
3 = Wed 9 = Mon to Sat
4 = Thurs 10 = Sat & Sun
5 = Fri 11 = every day
tS1-hh Start time band 1 - hours 0 0 23 h
tS1-m Start time band 1 - minutes 0 0 59 min
td1-d Defrost 1 - day 0 0 11 -
0 = disabled 6 = Sat
1 = Mon 7 = Sun
2 = Tue 8 = Mon to Fri
3 = Wed 9 = Mon to Sat
4 = Thurs 10 = Sat & Sun
5 = Fri 11 = every day
td1-hh Defrost 1 - hours 0 0 23 h
td1-mm Defrost 1 - minutes 0 0 59 min
Tab. 4.d
* U: User; S: Service; M: OEM
4.3 Mobile device
The “Applica” app can be used to configure the controller from a mobile device (smartphone, tablet), via NFC (Near Field
Communication) or Bluetooth Low Energy (BLE). Heosone is fitted with an internal clock for managing store opening hours. The
opening and closing times can be set and this time band enabled for each day of the week using the Applica app.
Procedure (modify parameters):
1. download the CAREL “Applica” app;
2. (on the mobile device) enable communication and mobile data;
3. open Applica;
4. move the mobile device near to the user terminal again to recognise the configuration;
5. enter the password (*);
6. set the parameters as needed;
7. move the mobile device near to the user terminal again to upload the configuration parameters.
50002730_020_R01
BLE
NFC
max
10mm
Fig. 4.q
(*) pre-assigned by the cooler manufacturer to allow maintenance only by authorised service technicians. See the parameter
table.
Caution: during the first connection, Applica aligns itself with the software version on the Heosone controller via a cloud
connection; this means a mobile data connection is needed at least for this first connection.
To Next Page
Loading...
