35Heosone +050002740 rel. 1.1 - 17.05.2021 Technical specifications
ENG
Model all versions 115 Vac
- Small
all versions 230 Vac
- Small
all versions 230 Vac -
Medium
FieldBus serial Lmax = 500 m, shielded cable Integrated
HW driver: asynchronous half duplex RS485 main. Typical reception
resistance 96 kΩ, equal to 1/8 of unit load, i.e. 1/256 of maximum
load applicable on the line
Not optically-isolated
Max data rate: 19200 bits/s
Maximum number of connectable devices: 20
Protocol: Modbus RTU
Conformity
to standards
CE conformity:
Low voltage directive 2014/35/EU
EN 60730-1, EN 60335-1 (sect. 29 & 30),
EN 60335-2-34 (sect. 19.101 & 19.103),
FCC & ETSI standards (for NFC in User Interface)
Electromagnetic compatibility directive 2014/30/EU
EN 61000-6-1/2/3/4
EN 61800-3: Adjustable speed electrical power drive systems. EMC
requirements, including specific test methods.
EN61000-3-2: Electromagnetic compatibility (EMC). Part 3-2: Limits
- Limits for harmonic current emissions (equipment input current
<= 16 A per phase)
EN 55014-1: Electromagnetic compatibility: Requirements for
household appliances, electric tools and similar apparatus - Part 1:
Emission
Maximum permissible short-circuit current at
the drive’s terminals (IEC 61439-1):
100 kA
Minimum short-circuit current for tripping
the fuses
500 A
Applications with flammable refrigerant gases IEC 60079-15 (clauses 17 and 19, applied to relays according to
type. However, acceptability of the relays must be verified and
assessed in the final application).
UL conformity UL 60730-1, UL 60335-1, UL 60335-2-34, UL 60079-15
ROHS directive 2011/65/EN EN 50581
Tab. 5.b
To Next Page
Loading...
